The Vibro sifter can screen and filter any particles, powders, or mucus that fall within a specified range. Users in the field of fine screening prefer the material because it has a wide application range. Users of vibratory sifters, on the other hand, frequently chose negligence while selecting a Vibro sifter model.
The inefficiency of the entire screening process is due to the minute details of one facet. I’ll give you a few pointers on how to choose a Vibro sifter so you don’t have to take any chances.
The gyratory vibrations are used in the Vibro Sifter machine. The particle size of the substance is used to separate it. When the motor is turned on, vibration is produced in the screen/sieve, causing the material to pass through the sieves in the order in which it is sized.
The creation of vibration along the vertical axis in three separate planes, using a specifically built vibratory motor that meets diverse output requirements. It produces a 100 percent rotating motion, which promotes dispersion stirring and material stratification to sift. On Vibroscreen, the feed material runs horizontally with a loop pattern.
Before we begin researching the screens and equipment to use, we must first examine three critical aspects of the process:
A) What are the properties of the material?
B)What do we expect to achieve with our sieving application?
C) In the proposed method, how will the Vibro sifter be installed?
Material Characteristics
Because the Vibro sifter may screen particles, powders, mucilage, and other materials, it should be chosen carefully based on the material characteristics in the Vibro sifting type, which include the material’s form and size, as well as its fluidity.
Vibro Sifter Material
Carbon steel and stainless steel are used to make the Vibro sifter. The main reason for this is because the Vibro sifter’s material varies due to varied screening materials. Carbon steel has a lower price tag than stainless steel.
For example, in the salt, wheat, and food-related industries, the entire machine is constructed of 304 stainless steel, primarily because the stainless steel material’s hardness, sheet thickness, and wear resistance are better, and it is easier to clean after stringent polishing and polishing. Affect the ultimate product’s quality.
Capacity requirement
The screening output is also one of the primary reference data when choosing a Vibro sifter. Under typical conditions, we will recommend a small type of Vibro sifter for users with little output, such as 400mm or 600mm, and the output is greater. Users that require a larger Vibro sifter, such as 1500mm, 1800mm, or 2000mm, should normally choose a larger variety of Vibro sifter.
Actual Site Situation
The size of the site must be considered when designing the Vibro sifter. The screening yield is affected by the mesh size of the screen. The higher the screening efficiency and output, the larger the screening area, thus the size of the site is also Vibro sifter.
The Vibro sifter technique is described in detail above. Users that require it may bring their materials to the factory to be tested. You can contact Promas Engineers, we are the best Vibro sifter manufacturer, at any time if you have specific needs for the Vibro sifter’s size. Our technical engineers will customize the Vibro sifter equipment for you based on your requirements.
