R 967, Promas Engineers, TTC Industrial Area, M.I.D.C. Rabale, Navi Mumbai - 400072

Home / Processes / Milling / Jet Mill

Jet Mill

Jet Mill

Capacity :

Capacity :

2″ to 12″.

Model Available :

Model Available :

Application :

Application :

Jet Mills are widely used in the manufacture of drugs and pharmaceuticals, organic and inorganic pigments, optical brighteners, fluorescent pigments, food colour synthetic dyes, metal (except malleable metals) carbides & borides, herbicides and pesticides, ceramic glasses, alumina, feldspar, frit, kaolin, mullite, electronic grade materials such as materials required for semiconductors, phosphors, photo electronic, high-temperature critical materials and rocket solid fuels, etc.

We are jet mill manufacturer, supplier, and exporter of multiple variety manual and fully automated jet mill micronizer, micro pulverizer, and spiral fluidize air with the industrial requirement.

Working Principle :

Working Principle :

Jet Milling is a concept of feeding powder particles into a flat circular milling chamber and subjecting the same tangentially with pressurized air or nitrogen through a venturi. The Powder Particles are accelerated in a spiral movement inside the milling chamber by a number of angular holes in a ring and placed around the periphery of the chamber.

The heat-sensitive and low melting point materials are easily micronized. Micronizer takes place due to the collision between the incoming particles and the particles, which are already accelerated into the spiral path, The larger Particles of the product get retained at the periphery of the chamber by centrifugal force and the smaller particles exit with the exhaust air from the central portion of the chamber.

The material can be milled to an average particles size of 0.2 to 5 micron or coarse ground to 400 mesh depending upon characteristics of the product.

The milling action of the particle is because of the high velocity of air/gases instead of pins, jaws or hammers and because of this heat does not get generated during milling. The adiabatic expansion of compressed air takes place with the resultant cooling effect. The heat-sensitive and low melting point materials are micronized without use of freeze grinding methods.

Particle Separator :

Particle Separator :

The particle size distribution is controlled by adjusting pressure and feed rate. The particles are trapped by specially designed cyclonic separator and finger-bag made of non-woven PTFE coated cloth without risk of fiber contamination.

The dust separator and collector are cylindrical and have a sanitary clamp for quick accessible connections. The system is without a reverse jet so as to save air / gas consumption. With the finger-bag shaking arrangement, the bag is automatically cleaned with a set time interval.

We also provide a high-efficiency dust separator combining inertial and static effects with membrane filter cartridges, reverse-pulse, automatic cleaning, and final safety HEPA filter that exhausts clean air to the atmosphere. Fully automated and manual jet mills are mounted on an ergonomically designed portable stand with multiple options like micronizer, micro pulverizer and spiral fluidized air.

Advantages :

Advantages :

The micronizing of the powder improves absorption capacity of the drugs in the human body. This also results in new and unusual chemical and physical properties relating to dependability, solid-state reaction rate, texture, color, absorption, etc.

The surface area achieves an increase in potency of drugs, which reduces the dosage of the drugs. Product of 30 mesh size when jet-milled to 5 micron, has more than 160,000 particles & surface area increases more than 115 times. This results in faster reaction time for chemicals, faster ignition time in the case of solid fuels of rockets. The Jet Milled pesticides & herbicides cover much more surface area using less of the active ingredients, thus reducing the cost. The polishing powders used for polishing the lenses, computer hard disc or in toothpaste are required to be a narrow particle size distribution for maximum productivity. The abrasives used in these polishing powders are very precisely milled.

Any cosmetic product requiring silky smoothness in application can be achieved in Jet Mill. The reflectivity of light occurs when the particle size of the pigment approaches a precise relationship to the wavelength of visible light. Therefore by controlling the particle size, the product quality & its brilliance can be ascertained.

Jet Mill versions are sanitary, Indian FDA and US-FDA accepted designs, in line with GMP practices and in accordance with all pharmaceutical specifications worldwide. The Jet Mills manufactured by Promas Engineers have replaceable internal rings with optimized grinding angles for various products. The design & construction of Jet Mills is the result of many years of dependable, uninterrupted service.

Optional :

Optional :

Promas Engineers Jet Mills can be supplied along with following options.

The Feeding System :

The Feeding System :

We provide two types of feeding system along with the Jet Mill in accordance with the properties of the products.

Read Our Latest Blog On Linkedin

© 2020 | All Right Reserved

Designed & Developed by Initialize Group