Agitated Vacuum Dryer

Capacity:

5 Litres to 5000 Litres chamber volume

M. O. C:

SS 316, SS 304, Carbon Steel

We are manufacturer, supplier and exporter of agitated vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world.

Application:

To dry heat sensitive and air sensitive material under vacuum thus accomplishing the drying at moderate temperature avoiding contact with air.

Working Principle Agitated Vacuum Dryers

The entire drying chamber is well machined to bring about a close encounter with the agitator blade thus ensuring proper shuffling of the material and thus avoiding localised over heating. The leak proof front opening door ensures easy cleaning of the entire chamber.

The top loading and bottom unloading facility provides for easy charging and discharging of the material. The cyclonic trap prevents the fine dust of the dry material from flying into the vapour condenser. The condenser and the condensate collection tank prevent the vapours from entering the vacuum pump. Appropriate vacuum pump and accessories are provided with the unit with valves to adjust the right vacuum in the unit. The entire unit is mounted on a steel frame.

Our Specialities

  • Creating innovative and cost effective designs as per your requirement to give you maximum and best output from our equipment
  • Providing Lab Models in exactly the same material to give the accurate results Design and supply of entire turnkey projects at any scale, from 500 kgs to 20,000 kgs capacities.

They are used with particular success in agglomeration free rapid drying, heterogeneous reactions with systems of different substances, sterilization and in general for vacuum application. Heating arrangement can also be provided along with the unit.

Choice of product contact materials: AISI 304L, AISI 316L, Hastelloy optional HALAR/PTFE Coating available.

Volume of the wet material loaded into the dryer is restricted to 40-45 % of gross volume.

Salient Features

  • Fast dry product discharge :- Dried material is discharged quickly by pushing action of the blade towards the discharge valve
  • Large size front door allows full accessibility for easy and thorough inner cleaning
  • Full door opening & Dismantable blade, not in hollow blade d,esign helps for Cleaning / Validation
  • Standard manufacturing high geometric accuracy of the body surface ensuring efficient removal of the product from the heated walls
  • Full process automation possible by means of PLC & DCS (* Optional)
  • Internal heating is through a hollow shalf. The blades are provided with scrappers with minimum clearance versus heated wall which increases the rate of heat transfer.
  • It is possible to install the dryer through a partition wall separating its loading unloading connections from its drive assembly, vacuum system water heating system etc.
  • High speed chopper contributes to the drying process

More Products